Monarflake

monarflake
monarflake
monarflake

About

Monarflake is a decorative resin system which incorporates multi-coloured p.v.c. flakes, coloured base resin and clear resin glaze coats to produce a decorative resin floor finish.

Monarflake is used in areas where a durable, decorative surface is required such as; showrooms, corridors, veterinary practices, toilets, canteens, or any flooring area when a decorative, durable, safe floor is required.

Design a floor

The unique characteristics of Monarflake enable the designer to create a floor of infinite colour combinations. Any RAL/B.S. or pantone colour can be used as a base. The flake size and colour blend can be chosen to create unlimited options.

Performance

Monarflake is capable of withstanding forklift trucking, unlike monotone surfaces. Although the system will scratch, because of the ‘busy’ finished appearance, scratches are less noticeable.

Monarflake Sample Service: - any blend of flakes can be produced and forwarded to the client for approval.

monarcoat700
monarcoat700
monarflake

Data Sheet

Monarflake

General

Appearance: Multi-coloured fleck and flake appearance with matt, silk or gloss clear resin sealer.
Colours: Unlimited colour options.

Application

Coverage  
Light Traffic: 24 Hours @ 20°C
Heavy Traffic: 48 Hours @ 20°C

Advantages

Steamless Monarflake provides a continuous seamless floor.
Tough Durable, hard-wearing, low maintenance flooring. Mottled appearance helps to obscure scratches, marks and stains.

Installation

  To suitably prepared concrete or cement and sand substrate (mechanically by dust-free shotblasting, scarifying or diamond grinding).
  Prime with Monarprime epoxy resin primer.
  Coat with Monarcoat 720 coloured (see Monarcoat 720 data sheet).
  Whilst uncured blind surface with Monarflake chosen blend at 0.4kg/m²
  Remove excess flakes
  Apply additional seal coats as following options;
Option A Seal with one coat of Monarglaze clear to give textured surface.
Option B Apply a second coat Monarglaze clear to lessen profile but leave a slip-resistant surface.
Option C Apply a third coat Monarglaze to give a smooth surface for ease of cleaning, but less slip-resistant.

Data Sheet