Monarch Epoxy Flooring

About

Monarcoat 700 is an epoxy resin coating used

where a fast-cure is required in an industrial environment.

It provides an attractive, dust-free chemical and abrasion resistant floor coating.

Monarcoat 700 is based on a blend of epoxy resins, mineral fillers and solvents.

Monarcoat 700 is particularly well suited to forming lines / zebra crossings and chevrons, to mark hazardous areas, denote pedestrian walkways and line marking.

Monarcoat 700 can be loaded with high pigment levels to produce white and safety yellow colours without opacity problems.

Due to its fast-cure properties areas and lines can be marked out and coated, and be re-coated within a few hours.

Monarcoat 700 is a two pack product. Add the contents of the hardener into the base tin and stir mechanically for 2-3 minutes.

Apply by medium pile roller (or radiator roller for lines) in two separate applications.

Physical Properties

Pack sizes:

3 and 6kg coverage

Coverage:

150g/m²/coat, depending on porosity and profile of substrate.