Data Sheets

Data Sheet

Monarcoat 700 Back To Top

Monarcoat 700

Appearance Cololoured, liquid resin
Colours light grey, mid grey, flint grey, mid green, light green, mid blue
Safety Colours white, safety yellow, safety red

Advantages

  Seamless: continuous gloss finish
  Versatile: non-slip options available
  Tough: Durable, hardwearing, low maintenance flooring
  Fast-Cure: enables multi-coat applications in one day
  Pot life: long pot life for extended use time

Application

Coverage: 6-7m²/kg/coat
No. of Coats: 2 coat floor treatment. Further coats may be required on light colours
Pot Life: 45 minutes @ 20°C
Re-Coat: 2 Hours @ 20°C
Light Traffic: 24 Hours @ 20°C

Data Sheet

Monarflow Back To Top

Monarflow

Appearance Coloured, liquid resin flooring system
Colours Lightgrey, mid grey, tile red, mid green, mid blue, and beige. Monarflow can also be manufactured to any B.S. or R.A.L. colour.

Advantages

Steamless Easily cleaned and hygienic
Chemical Resistant Fully sealed seamless floor
Tough Long maintenance free life

Application

Coverage: 1.8kg/M2/mm thick
Consistency: Creamy consistency, thick, coloured liquid
Min Application Thickness: 1 mm
Max Application Thickness: 5 mm
Application Temperature: + 8 to 35°c
Service Temperature: - 20 to 55°c
Pot life in Bulk at 20°c: 15 minutes
Open work time at 20°c: 45 minutes
Initial Cure: 12 hours at 20°c
Light Trafficking 24hrs at 20°c: 48 hours
Vehicular Trafficking at 20°c: 3 days
Storage: Store at 5°c to 30°c
Shelf Life: Up to 2 years

Data Sheets

Monarthane Back To Top

Monarthane

Appearance Solid colour with white mottled fleck

Curing @ 20°C

Foot traffic 10hrs
Vehicular Traffic 24hrs

Data Sheet

Monardeck Back To Top

Monardeck I.L.

1st Coat Monarprime Epoxy resin primer - apply by squeegee and roller @ 30-40m²/10kg unit - blind whilst uncured with quartz aggregate 0.4mm-0.8mm @ 3kg/m²
2nd Coat Monardeck Applied by squeegee and roller @ 0.7kg/m²

Monardeck T.L.P.

1st Coat Monarprime Epoxy resin primer - apply by squeegee and roller @ 30-40m²/10kg unit
2nd Coat Monarflex Elastomeric membrane coating applied by squeegee @ 1.4-1.8kg/m²
3rd Coat Monardeck Applied by trowel/squeegee @ 2kg/m². Whilst uncured cast in quartz aggregate 0.7mm-1.2mm @ 3kg/m² until full saturation.
4th Coat Monardeck Applied by squeegee and roller @ 0.7kg/m²

System properties for T.L.P.

Elongation at break 70%
Shore ‘D’ hardness 60
Tensile Strength 7N/mm²
Compressive Strength 90N/mm²
Widthways Movement Maximum widthways movement of structure 3mm. Above this figure suitable movement joints should be employed.

Data Sheet

Monarcove Back To Top

Monarcove

Coverage: 18kg; 5-7m.lin @ 100mm high (depending on radius of coving trowel)
Cure time: Heavy Traffic 24 hours Full chemical cure 3 days (cure times will be extended @ temperatures less than 20°C

Data Sheet

Monarflake Back To Top

Monarflake

Appearance: Multi-coloured fleck and flake appearance with matt, silk or gloss clear resin sealer.
Colours: Unlimited colour options.

Application

Coverage  
Light Traffic: 24 Hours @ 20°C
Heavy Traffic: 48 Hours @ 20°C

Advantages

Steamless Monarflake provides a continuous seamless floor.
Tough Durable, hard-wearing, low maintenance flooring. Mottled appearance helps to obscure scratches, marks and stains.

Installation

  To suitably prepared concrete or cement and sand substrate (mechanically by dust-free shotblasting, scarifying or diamond grinding).
  Prime with Monarprime epoxy resin primer.
  Coat with Monarcoat 720 coloured (see Monarcoat 720 data sheet).
  Whilst uncured blind surface with Monarflake chosen blend at 0.4kg/m²
  Remove excess flakes
  Apply additional seal coats as following options;
Option A Seal with one coat of Monarglaze clear to give textured surface.
Option B Apply a second coat Monarglaze clear to lessen profile but leave a slip-resistant surface.
Option C Apply a third coat Monarglaze to give a smooth surface for ease of cleaning, but less slip-resistant.

Data Sheets

Monarseal 322 Back To Top

Monarseal 322

Colours grey, red (other colours on request)
Pot Life 80 minutes @ 20°C 120 minutes @ 10°C

Application temperatures

Minimum 3°C
Maximum 30°C
Coverage 0.20 - 0.25 Kg/Sq.m./coat
Volume Solids 65%

Data Sheets

Monarcoat 720 Back To Top

Monarcoat 720

Appearance Coloured, liquid resin
Appearance light grey, mid grey, tile red, mid green, light blue, mid blue, black and beige.

Advantages

Steamless Continuous gloss finish for hygiene and easy cleaning.
Versatile Non-slip variations are available. Suitable for use on wall surfaces and in harsh conditions.
Tough Durable, hardwearing and low maintenance.

Application

Coverage: 4.5m²/kg thick depending on profile of substrate and porosity of surface
No. of coats: minimum 2 coats
Application Temperature: 10ºc + (use Monarcoat L.T.C., on temperatures between 0ºc and 10ºc)
Pot life @ 20ºc 30mins (15 mins for F.C. grade)
Tack-free time: 8 hours @ 20ºc
Light trafficking: 36 hours @ 20ºc (Use F.C., grade for rapid access)
Hard full Cure: 48 hours
Storage: + 5ºc - 30ºc
Shelf life: Up to 2 years

Different Grades

monarcoat 720: Standard cure epoxy coating
monarcoat 720 f.c. Fast cure grade
monarcoat 720+ Anti slip grade
monarcoat 720v Vertical grade for walls/ceilings
monarcoat l.t.c. Low temperature cure grade for application in cold cure conditions
monarcoat f.x. Flexible grade for plant room/bund applications

Data Sheet

Cemflow Back To Top

TECHNICAL DATA @ 20ºC

Foot Traffic 2/3 hours
Light Traffic 24 hours
Heavy Traffic 2 days
Coverage 25kg bag2.8m² @ 5mm
1 Day 15.00
2 Days 20.00
28 Days 40.00
Application Thickness 5-30mm
Compressive Strength (N/mm־²)  
1 Day 15.00
2 Days 20.00
28 Days 40.00

Data Sheet

Monargrip Back To Top

Monargrip

Appearance: Seamless gloss textured surface

Advantages

  Seamless gloss textured surface
  Superb level of slip-resisitance

Cleaning

Cleaning: Clean by machine scrubber only. The floor surface is not ‘mopable’ due to textured finish.
  Please consult Technical Department for suitable cleaning material

Strength

Compressive strength: 80?/mm²
Tensile Strength: 16?/mm²
Flexural Strength: 26?/mm² thick

Data Sheet

Monarprime Back To Top

Monarprime

Appearance: Red or yellow gloss coating

Application

Cure Time: 18 Hours @ 20ºC centigrade
Inter-Coat Time: Apply on consecutive days to ensure inter-coat adhesion.
Coverage  
First coat 3.5m־/kg
Second coat 5m־/kg
Time Between Further Layers Time prior to overlaying with further resin/vinyl flooring is 24 hours.